Språk: [no]

The slave replies the status register in response to command 10. The register contains information about bus collisions, resets, supply voltage, and stand-by mode.

Bit Number	Status
.7	Bus Collision bit is set
.6	Stand-by mode is selected
.5	-open-
.4	External voltage supply available
.3	-open-
.2	Remote voltage is above 15V
.1	-open-
.0	Reset flag

tilbake til innholdforrige sideneste side

Side 10 / 29

  Utskriftsversjon

Topp